Online PDF Repair Manual Download link for 2005-2007 Cadillac STS/SRX. This manual is how to install Exhaust System in 2005-2007 Cadillac STS/SRX. You can find about how to installation, removal, repair manual other for your car.
Installation Summary :
Exhaust System Removal:
1. Measure 1.5” for STS or 9” for SRX before the driver side muffler inlet weld. Using a chain cutter or saw, cut the rear muffler off at this measurement.
2. Remove the hanger on the inlet side of the muffler from the rubber isolator.
3. Remove both hangers near the factory tips from the rubber isolators.
NOTE: Be sure to save all rubber isolators from the vehicle. They will be used to install the CORSA Performance exhaust system in later steps.
4. Repeat steps 1-3 for the passenger side muffler.
Exhaust System Installation:
1. Remove all exhaust system components from the shipping cartons, including clamps. NOTE: There are two 2.5-inch clamps supplied. NOTE: Apply the anti-seize lubricant (supplied) to the threads ONLY of all the TORCA band clamps and flange bolts. Failure to follow this procedure can cause nuts to seize on clamps and potentially destroy threads. After applying anti-seize lubricant, be sure to thoroughly clean hands as lubricant will tarnish stainless steel.
We found this information in search engine is available on the internet. None of those materials are hosted in this server nor uploaded by me in someone’s servers. Read our DISCLAIMER for more detail.
